2019-05-07 11:29:26 3044瀏覽
本篇文章扣丁學堂PHP培訓小編給讀者們分享一下swoole_process實現進程池的方法,文中有代碼列出供大家參考學習,對PHP開發技術感興趣的小伙伴就隨小編來了解一下吧,希望對小伙伴們有所幫助。
swoole 的進程之間有兩種通信方式,一種是消息隊列(queue),另一種是管道(pipe),對swoole_process 的研究在swoole中顯得尤為重要。
預備知識
IO多路復用
swoole 中的io多路復用表現為底層的 epoll進程模型,在C語言中表現為 epoll 函數。
epoll 模型下會持續監聽自己名下的素有socket 描述符 fd
當觸發了 socket 監聽的事件時,epoll 函數才會響應,并返回所有監聽該時間的 socket 集合
epoll 的本質是阻塞IO,它的優點在于能同事處理大量socket連接
Event loop 事件循環
swoole 對 epoll 實現了一個Reactor線程模型封裝,設置了read事件和write事件的監聽回調函數。(詳見swoole_event_add)
Event loop 是一個Reactor線程,其中運行了一個epoll實例。
通過swoole_event_add將socket描述符的一個事件添加到epoll監聽中,事件發生時將執行回調函數
不可用于fpm環境下,因為fpm在任務結束時可能會關掉進程。
swoole_process
基于C語言封裝的進程管理模塊,方便php來調用
內置管道、消息隊列接口,方便實現進程間通信
我們在php-fpm.conf配置文件中發現,php-fpm中有兩種進程池管理設置。
靜態模式 即初始化固定的進程數,當來了一個請求時,從中選取一個進程來處理。
動態模式 指定最小、最大進程數,當請求量過大,進程數不超過最大限制時,新增線程去處理請求
接下來用swoole代碼來實現,這里只是為理解swoole_process、進程間通信、定時器等使用,實際情況使用封裝好的swoole_server來實現task任務隊列池會更方便。
假如有個定時投遞的任務隊列:
<?php /** * 動態進程池,類似fpm * 動態新建進程 * 有初始進程數,最小進程數,進程不夠處理時候新建進程,不超過最大進程數 */ // 一個進程定時投遞任務 /** * 1. tick * 2. process及其管道通訊 * 3. event loop 事件循環 */ class processPool { private $pool; /** * @var swoole_process[] 記錄所有worker的process對象 */ private $workers = []; /** * @var array 記錄worker工作狀態 */ private $used_workers = []; /** * @var int 最小進程數 */ private $min_woker_num = 5; /** * @var int 初始進程數 */ private $start_worker_num = 10; /** * @var int 最大進程數 */ private $max_woker_num = 20; /** * 進程閑置銷毀秒數 * @var int */ private $idle_seconds = 5; /** * @var int 當前進程數 */ private $curr_num; /** * 閑置進程時間戳 * @var array */ private $active_time = []; public function __construct() { $this->pool = new swoole_process(function () { // 循環建立worker進程 for ($i = 0; $i < $this->start_worker_num; $i++) { $this->createWorker(); } echo '初始化進程數:' . $this->curr_num . PHP_EOL; // 每秒定時往閑置的worker的管道中投遞任務 swoole_timer_tick(1000, function ($timer_id) { static $count = 0; $count++; $need_create = true; foreach ($this->used_workers as $pid => $used) { if ($used == 0) { $need_create = false; $this->workers[$pid]->write($count . ' job'); // 標記使用中 $this->used_workers[$pid] = 1; $this->active_time[$pid] = time(); break; } } foreach ($this->used_workers as $pid => $used) // 如果所有worker隊列都沒有閑置的,則新建一個worker來處理 if ($need_create && $this->curr_num < $this->max_woker_num) { $new_pid = $this->createWorker(); $this->workers[$new_pid]->write($count . ' job'); $this->used_workers[$new_pid] = 1; $this->active_time[$new_pid] = time(); } // 閑置超過一段時間則銷毀進程 foreach ($this->active_time as $pid => $timestamp) { if ((time() - $timestamp) > $this->idle_seconds && $this->curr_num > $this->min_woker_num) { // 銷毀該進程 if (isset($this->workers[$pid]) && $this->workers[$pid] instanceof swoole_process) { $this->workers[$pid]->write('exit'); unset($this->workers[$pid]); $this->curr_num = count($this->workers); unset($this->used_workers[$pid]); unset($this->active_time[$pid]); echo "{$pid} destroyed\n"; break; } } } echo "任務{(diào)$count}/{$this->curr_num}\n"; if ($count == 20) { foreach ($this->workers as $pid => $worker) { $worker->write('exit'); } // 關閉定時器 swoole_timer_clear($timer_id); // 退出進程池 $this->pool->exit(0); exit(); } }); }); $master_pid = $this->pool->start(); echo "Master $master_pid start\n"; while ($ret = swoole_process::wait()) { $pid = $ret['pid']; echo "process {$pid} existed\n"; } } /** * 創建一個新進程 * @return int 新進程的pid */ public function createWorker() { $worker_process = new swoole_process(function (swoole_process $worker) { // 給子進程管道綁定事件 swoole_event_add($worker->pipe, function ($pipe) use ($worker) { $data = trim($worker->read()); if ($data == 'exit') { $worker->exit(0); exit(); } echo "{$worker->pid} 正在處理 {$data}\n"; sleep(5); // 返回結果,表示空閑 $worker->write("complete"); }); }); $worker_pid = $worker_process->start(); // 給父進程管道綁定事件 swoole_event_add($worker_process->pipe, function ($pipe) use ($worker_process) { $data = trim($worker_process->read()); if ($data == 'complete') { // 標記為空閑 // echo "{$worker_process->pid} 空閑了\n"; $this->used_workers[$worker_process->pid] = 0; } }); // 保存process對象 $this->workers[$worker_pid] = $worker_process; // 標記為空閑 $this->used_workers[$worker_pid] = 0; $this->active_time[$worker_pid] = time(); $this->curr_num = count($this->workers); return $worker_pid; } } new processPool();
想要了解更多關于PHP開發方面內容的小伙伴,請關注扣丁學堂PHP培訓官網、微信等平臺,扣丁學堂IT職業在線學習教育有專業的PHP講師為您指導,此外扣丁學堂老師精心推出的PHP視頻教程定能讓你快速掌握PHP從入門到精通開發實戰技能??鄱W(xué)堂PHP技術交流群:374332265。
【關注微信公眾號獲取更多學習資料】 【掃碼進入HTML5前端開發VIP免費公開課】